APS Cone bushing (0.6") - RipTide
APS Cone bushing (0.6") - RipTide
*Price is for a single bushing, so you can mix and match. You need 4 per board. Buy 4 or more bushings to save .50 cents each !
The least expensive yet most effect upgrade for any board. Especially for those small or newer riders.
We sell RipTide's APS Barrel Longboard Conical individually (Order 4 per board). No Washers are included.
Conical bushings have the least amount of resistance to your lean and carves.
Dimensions
Standard 0.6″ tall x 0.98″ wide
Durometers (Hardness):
- 60A – Clear Orange
- 62.5A - Clear Blue
- 65A - Clear Yellow
- 67.5a - Clear Red
- 70A - Purple
- 75A - Green
- 80A - Orange
- 85A – Blue
- 87.5A - Hot Pink
- 90A – Yellow
- 92.5A – Prussian Blue
- 95A – Red
- 97.5A – Arsenal Green
Keep in mind that the rounded edge goes towards the hanger of the skateboard truck and fits snugly into the bushing seat.
APS™ Formula: Animated Polymer System
As the name implies, this compound is very lively and offers high rebound with lots of control and lean. For the same durometer, the APS will turn 10% to 15% more than the same durometer of other brands. In addition, the APS does not change much when you tighten the kingpin nut past snug. We recommend tightening to the point where it is difficult to turn the bushing in the bushing seat by hand. Use a flat washer for lower resistance and a cupped washer for higher resistance.